Configure an OpenVPN client by using an .ovpn file

The new OpenVPN client configuration is displayed.

Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

> config
(config)>

(config)> add vpn openvpn client name
(config vpn openvpn client name)>

where name is the name of the OpenVPN server.

The OpenVPN client is enabled by default. To disable the client, type:

(config vpn openvpn client name)> enable false
(config vpn openvpn client name)>

(config vpn openvpn client name)> zone value
(config vpn openvpn client name)>

To view a list of available zones:

(config vpn openvpn client name)> zone ?

Zone: The zone for the openvpn client interface.
Format:
  any
  dynamic_routes
  edge
  external
  internal
  ipsec
  loopback
  setup
Current value:

(config vpn openvpn client name)>

(config vpn openvpn client name)> metric value
(config vpn openvpn client name)>

where value is an interger between 0 and 65535. The default is 0.

(config vpn openvpn client name)> username value
(config vpn openvpn client name)> password value
(config vpn openvpn client name)>

(config vpn openvpn client name)> config_file value
(config vpn openvpn client name)>

(config)> save
Configuration saved.
>

Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.