Change the default hotspot bandwidth limits

Required configuration items

To change the default hotspot IP address and subnet:


  1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access rights.
  2. Access the device configuration:

    1. Locate your device as described in Use Digi Remote Manager to view and manage your device.
    2. Click the Device ID.
    3. Click Settings.
    4. Click to expand Config.

    1. On the menu, click System. Under Configuration, click Device Configuration.

      The Configuration window is displayed.

  3. Click Network > Hotspots > hotspot.
  4. For Maximum download speed, type the maximum download speed in kilobytes per second (Kbps).

    Note Setting the Maximum download speed to 0 means that the bandwidth is unlimited. This can have an adverse effect on performance.

  5. For Maximum upload speed, type the maximum upload speed in kilobytes per second (Kbps).

    Note Setting the Maximum upload speed to 0 means that the bandwidth is unlimited. This can have an adverse effect on performance.

  6. Click Apply to save the configuration and apply the change.
  1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX54 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. At the command line, type config to enter configuration mode:

    > config
(config)>

  3. Change the default maximum download speed:
    (config)> network hotspot hotspot bandwidth_max_down value
(config)>

    where value is an integer between 1 and 100000 and represents the maximum download speed in Kbps.

    Note Setting the maximum download speed to 0 means that the bandwidth is unlimited. This can have an adverse effect on performance.

  4. Change the default maximum upload speed:
    (config)> network hotspot hotspot bandwidth_max_up value
(config)>

    where value is an integer between 1 and 100000 and represents the maximum upload speed in Kbps.

    Note Setting the maximum upload speed to 0 means that the bandwidth is unlimited. This can have an adverse effect on performance.

  5. Save the configuration and apply the change.
    (config)> save
Configuration saved.
>
  6. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.