Reset your device to the factory defaults

You can reset the Connect IT to the factory default settings. Resetting the device to factory defaults performs the following actions:

• Clears all configuration settings.
• All firmware updates are deleted.
• Deletes all user files, including Python scripts.
• Regenerates SSH keys.
• Clears event and system log files.
• Creates a new event in the event log, indicating a factory reset.

Note While the settings are reset, the device's firmware version remains the same.

1. Make sure that the Connect IT has been powered on for at least 30 seconds.
2. Locate the ERASE button on the back of the device.
3. Press and hold the ERASE button for 5 seconds. The device beeps five times during the reset.
4. The device resets to factory defaults and then reboots automatically.

DOCUMENT RESOURCES	DIGI RESOURCES
Copyright Product page More documentation PDF	About us Contact us Support