Show WAN bonding details and statistics

You can display the status of WAN bonding for a particular device in the Web UI or command line. You can obtain statistics about WAN bonding for multiple devices in Digi Remote Manager.

Digi Remote Manager

To see WAN bonding statistics for multiple devices in Digi Remote Manager:

  1. Log in to Digi Remote Manager.

  2. Click Devices.

  3. In the Devices list, click the device you want to view.

    The Details page displays.

  4. Click the Metrics tab.

  5. Click Sdwan Details to expand.

    The WAN bonding details display.

 

  1. Log into the EX15 WebUI as a user with full Admin access rights.

  2. On the main menu, click Status.

  3. In Networking, click WAN Bonding to expand the settings.

    4. The WAN bonding details display.

 

To show WAN bonding information:

  1. Select the device in Remote Manager and click Actions > Open Console, or log into the EX15 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. Use the show wan-bonding command at the system prompt:
    > show wan-bonding

  WAN Bonding Status
  ------------------
  Status              : Connected
  Server Address      : 133.183.203.237
  Tunnel Username     : test1
  Tunnel Address      : 146.78.40.226


  WAN Bonded Interfaces
  ---------------------
  Channel #0:         : eth1 (eth1)
  Channel #1:         : modem (wwan0.1)

>
  3. Use the show wan-bonding command to view additional status and statistics:
    > show wan-bonding verbose

  WAN Bonding Status
  ------------------
 Tunnel Info
 ----------------
 Status          connected
 Endpoint        133.183.203.237:443 (#0)
 Network         146.78.40.226/255.255.255.0 gw 146.78.40.1
 Total Bytes     0 in, 427 out
 Channel Online  2

 Channel #0 (eth1)
 ----------------
 Enabled         Yes
 Status          "connected"
 Uptime          5 sec
 Latency         41ms (current) / 41ms (idle)
 In Transit      0
 Last Error      null
 Current (1sec)  RX 4 sent, 0 lost; TX 5 sent, 0 lost, 4 acked
 Total           RX 16 sent, 0 lost; TX 18 sent, 0 lost, 18 acked

 Channel #1 (wwan0.1)
 ----------------
 Enabled         Yes
 Status          "connected"
 Uptime          5 sec
 Latency         55ms (current) / 57ms (idle)
 In Transit      0
 Last Error      null
 Current (1sec)  RX 4 sent, 0 lost; TX 4 sent, 0 lost, 4 acked
 Total           RX 17 sent, 0 lost; TX 19 sent, 0 lost, 19 acked

>
  4. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.