Show LAN status and statistics

 

  Web

    Log into the EX15 WebUI as a user with full Admin access rights.

  1. From the menu, click Status.
  2. Under Networking, click Interfaces.
  1. Select the device in Remote Manager and click Actions > Open Console, or log into the EX15 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. Enter the show network command at the Admin CLI prompt:
    > show network

 Interface         Proto  Status   Address
 ----------------  -----  -------  -------------------------------
 setupip         IPv4   up       192.168.210.1/24
 setuplinklocalip  IPv4   up       169.254.100.100/16
 lan               IPv4   up       192.168.2.1/24
 lan               IPv6   up       fd00:2704::1/48
 loopback          IPv4   up       127.0.0.1/8
 wan               IPv4   up       10.10.10.10/24
 wan               IPv6   up       fe00:2404::240:f4ff:fe80:120/64
 modem             IPv4   up       10.200.1.101/30
 modem             IPv6   down

>
  3. Additional information can be displayed by using the show network verbose command:
    > show network verbose

 Interface         Proto  Status   Type    Zone      Device    Metric  Weight
 ----------------  -----  -------  ------  --------  --------  ------  ------
 setupip         IPv4   up       static  setup     lan      10      10
 setuplinklocalip  IPv4   up       static  setup     lan      0       10
 lan               IPv4   up       static  internal  lan      5       10
 lan               IPv6   up       static  internal  lan      5       10
 loopback          IPv4   up       static  loopback  loopback  0       10
 wan               IPv4   up       dhcp    external  wan      1       10
 wan               IPv6   up       dhcp    external  wan      1       10
 modem             IPv4   up       modem   external  wwan1     3       10
 modem             IPv6   down     modem   external  wwan1     3       10

>
  4. Enter show network interface name at the Admin CLI prompt to display additional information about a specific LAN. For example, to display information about LAN, enter show network interface lan:
    > show network interface lan

 lan1 Interface Status
 ---------------------
 Device              : lan
 Zone                : internal

 IPv4 Status         : up
 IPv4 Type           : static
 IPv4 Address(es)    : 192.168.2.1/24
 IPv4 Gateway        :
 IPv4 MTU            : 1500
 IPv4 Metric         : 5
 IPv4 Weight         : 10
 IPv4 DNS Server(s)  :

 IPv6 Status         : up
 IPv6 Type           : prefix
 IPv6 Address(es)    : fd00:2704::1/48
 IPv6 Gateway        :
 IPv6 MTU            : 1500
 IPv6 Metric         : 5
 IPv6 Weight         : 10
 IPv6 DNS Server(s)  :

>
  5. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.