Show current static IP mapping

To view your current static IP mapping:

 

  Web

    Log into the EX15 WebUI as a user with full Admin access rights.

  1. On the main menu, click Status
  2. Under Networking, click DHCP Leases.
  1. Select the device in Remote Manager and click Actions > Open Console, or log into the EX15 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. At the command line, type config to enter configuration mode:

    > config
(config)>

  3. Show the static lease configuration. For example, to show the static leases for a lan named my_lan:
    (config)> show network interface my_lan ipv4 dhcp_server advanced static_lease
0
    ip 192.168.2.10
    mac BF:C3:46:24:0E:D9
    no name
1
    ip 192.168.2.11
    mac E3:C1:1F:65:C3:0E
    no name
(config)>
  4. Type cancel to exit configuration mode:
    (config)> cancel
>
  5. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.