After saving captured data to a file (see Save captured data traffic to a file), you can download the file from the WebUI or from the command line by using the scp (secure copy file) command.
Web
- On the menu, click System. Under Administration, click File System.
The File System page appears.
- Highlight the analyzer directory and click to open the directory.
- Select the saved analyzer report you want to download and click (download).
Log into the EX15 WebUI as a user with full Admin access rights.
Command line
- Select the device in Remote Manager and click Actions > Open Console, or log into the EX15 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.
- Type scp to use the Secure Copy program to copy the file to your PC:
> scp host hostname-or-ip user username remote remote-path local local-path to
where:
- hostname-or-ip is the hostname or IP address of the remote host.
- username is the name of the user on the remote host.
- remote-path is the location on the remote host where the file will be copied.
- local-path is the path and filename on the EX15 device.
For example:
To download the traffic saved in the file /etc/config/analyzer/eth0.pcpng to a PC with the IP 192.168.210.2, for a user named maria, to the /home/maria directory:
> scp host 192.168.210.2 user maria remote /home/maria local /etc/config/analyzer/eth0.pcpng to remote maria@192.168.210.2's password: eth0.pcpng 100% 11KB 851.3KB/s 00:00
PDF
