Review Connect IT 16/48 default settings

You can review the default settings for your Connect IT 16/48 device by using the local WebUI or Digi Remote Manager:

Local WebUI

  1. Log into the Connect IT 16/48 WebUI as a user with Admin access. See Using the local web interface for details.
  2. On the menu, click System > Device Configuration.

Digi Remote Manager

  1. If you have not already done so, connect to your Digi Remote Manager account.
  2. From the menu, click Devices to display a list of your devices.
  3. Locate your device as described in Use Digi Remote Manager to view and manage your device.
  4. Click the Device ID.
  5. Click Settings.
  6. Click to expand Config.

The following tables list important factory default settings for the Connect IT 16/48.

Default interface configuration

Interface type Preconfigured interfaces Devices Default configuration
Wide Area Networks (WAN)
  • ETH1
  • Ethernet: ETH1
  • Firewall zone: Internal
  • WAN priority: Metric= 1
    • IP Address: DHCP client
  • Digi SureLinkTM enabled for IPv4
 
  • ETH2
  • Ethernet: ETH2
  • Firewall zone: Internal
  • WAN priority: Metric= 5
    • IP Address: DHCP client
  • Digi SureLinkTM enabled for IPv4
 
  • SFP1
  • Ethernet: SFP1
  • Firewall zone: Internal
  • WAN priority: Metric= 1
    • IP Address: DHCP client
  • Digi SureLinkTM enabled for IPv4
 
  • SFP2
  • Ethernet: SFP2
  • Firewall zone: Internal
  • WAN priority: Metric= 5
    • IP Address: DHCP client
  • Digi SureLinkTM enabled for IPv4
Wireless Wide Area Networks (WWAN)
  • WWAN
  • WWAN cellular modem
  • Firewall zone: External
  • WAN priority: Metric=3
  • SIM failover after 5 attempts
Local Area Networks (LANs)
  • Loopback
  • Ethernet: Loopback
  • Firewall zone: Loopback
  • IP address: 127.0.0.1/8
 
  • Setup IP
  • Ethernet: ETH2
  • Firewall zone: Setup
  • IP address 192.168.210.1/24
 
  • Setup Link-local IP
  • Ethernet: ETH2
  • Firewall zone: Setup
  • IP address 169.254.100.100/16

Other default configuration settings

Feature Configuration
Central management
  • Digi Remote Manager enabled as the central management service.
Security policies
  • Packet filtering allows all outbound traffic.
  • SSH and web administration:
    • Enabled for local administration
    • Firewall zone: Internal
Monitoring
  • Device heath metrics uploaded to Digi Remote Manager at 60 minute interval.
  • SNMP: Disabled
Serial port
  • Enabled
  • Serial mode: Remote Access
  • Label: None
  • Baud rate: 9600
  • Data bits: 8
  • Parity: None
  • Stop bits: 1
  • Flow control: None