Configure network services

You can configure network services options in the Network Service Configuration page. All network services options are selected by default.

For each service you must specify the TCP port number. The ports are configured by default, and changing the default value is not recommended.

  1. Open the web UI.
  2. Click Network Services in the Configuration section. The Network Service Configuration page appears.
  3. Select the Enable option for the network service you want to enable.
    • Multicast Domain Name System (MDNS): Enables the discovery of the Hub on the local network.
    • Enable AnywhereUSB: Allows remote access to USB devices connected to this server. The default TCP Port value is 18574.
    • Enable Secure Shell Server (SSH): Allows users secure access to log in to the Digi device and access the command line interface. The default TCP Port value is 22.
    • Enable Web Server (HTTP): Enables web pages for configuration. The default TCP Port value is 80.
    • Enable Secure Web Server (HTTPS): Enables web page encryption to improve the security of web data transfers. The default TCP Port value is 443.
  1. Enter the port number in the TCP Port field. If you change the port number on this screen, you must also change the corresponding port number on your computer.
  2. Click Apply to apply and save the changes.