ST (Cyclic Sleep Wake Time)

This command applies to the XBee 3 DigiMesh RF Module.

Sets or displays the wake time of the device.

For devices in asynchronous cyclic sleep, ST defines the amount of time that a device stays awake after it receives RF or serial data.

For devices in synchronous sleep, the minimum wake time is a function of MT, RN, NH, and NN. If you increase these values such that ST is no longer big enough to get a message through the network during a wake cycle, then ST will be increased appropriately.

Parameter range

0x1 - 0x36EE80 (x 1 ms)

Default

0x7D0 (2 seconds)