SO (Sleep Options)
This command applies to the XBee 3 DigiMesh RF Module.
A bitfield that contains advanced sleep options that do not have dedicated AT commands.
You cannot set bit 0 and bit 1 at the same time.
Parameter range
0 - 0x13E
Bit field:
Unused bits must be set to 0. These bits may be logically OR'ed together:
|
Bit |
Description |
|---|---|
|
0 |
Sleep coordinator; setting this bit causes a sleep compatible device to always act as sleep coordinator. |
|
1 |
Non-sleep coordinator; setting this bit causes a device to never act as a sleep coordinator. |
|
2 |
Enable API sleep status messages. |
|
3 |
Disable early wake-up for missed syncs. |
|
4 |
Enable node type equality (disables seniority based on device type). |
|
5 |
Disable coordinator rapid sync deployment mode. |
Default
0
PDF
