NO (Network Discovery Options)

This command applies to the XBee 3 DigiMesh RF Module.

Set the Advanced Options that affect how a particular device responds to network discoveries—ND, DN and FN commands—and when sending a node identification.

Bit field:

Unused bits must be set to 0. These bits may be logically OR'ed together:

0x0 - 0x7 (bit field)

Bit	Meaning
0x01	Append the DD (Digi Device Identifier) value to discovery responses and node identification frames.
0x02	Local device sends its own ND response when ND is issued.
0x04	Append the RSSI of the last hop to discovery responses and node identification frames.

Parameter range

0 - 3

Default

0x0