D3 (DIO3/ADC3/TH_SPI_SSEL Configuration)
This command applies to the XBee 3 DigiMesh RF Module.
Sets or displays the DIO3/ADC3/TH_SPI_SSEL configuration (Micro pin 28/SMT pin 30/TH pin 17).
Parameter range
SMT/MMT: 0, 2 - 5
TH: 0 - 5
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 |
SPI_SSEL for the through-hole device N/A for surface-mount device |
| 2 | ADC |
| 3 | Digital input |
| 4 | Digital output, low |
| 5 | Digital output, high |
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 |
SPI_SSEL for the through-hole device N/A for surface-mount device |
| 2 | ADC |
| 3 | Digital input |
| 4 | Digital output, low |
| 5 | Digital output, high |
Default
0
PDF
