CE (Routing / Messaging Mode)
This command applies to the XBee 3 DigiMesh RF Module.
The routing mode of the XBee 3 DigiMesh RF Module.
A routing device forwards broadcasts and route discoveries for unicasts. A non-routing device does neither.
Indirect Messaging Coordinator
Device will not transmit point to multi-point unicasts until an end device requests them. Indirect messaging is only applicable for point-to-multipoint messages (TO (Transmit Options) = 0x40).
Indirect Messaging Poller
Device will periodically poll a coordinator for messages.
Parameter range
0 - 6
| Parameter | Description | Routes packets |
|---|---|---|
| 0 | Standard router | Yes |
| 1 | Indirect message coordinator | Yes |
| 2 | Non-routing device | No |
| 3 | Non-routing coordinator | No |
| 4 | Indirect message poller | Yes |
| 5 | N/A | N/A |
| 6 | Non-routing poller | No |
| Parameter | Description | Routes packets |
|---|---|---|
| 0 | Standard router | Yes |
| 1 | Indirect message coordinator | Yes |
| 2 | Non-routing device | No |
| 3 | Non-routing coordinator | No |
| 4 | Indirect message poller | Yes |
| 5 | N/A | N/A |
| 6 | Non-routing poller | No |
Default
0
PDF
