SC (Scan Channels)
This command applies to the XBee 3 802.15.4 RF Module.
Sets or displays the list of channels to scan for all Active and Energy Scans as a bit field. This affects scans initiated in AS (Active Scan) and ED (Energy Detect) commands in Command mode and during End Device Association and Coordinator startup.
Parameter range
0 - 0xFFFF (bit field)
Note A parameter of 0 will scan on the current channel configured by CH.
Bit field mask:
|
Bit |
IEEE 802.15.4 Channel |
Frequency (GHz) |
|---|---|---|
|
0 |
11 (0x0B) |
2.405 |
|
1 |
12 (0x0C) |
2.410 |
|
2 |
13 (0x0D) |
2.415 |
|
3 |
14 (0x0E) |
2.420 |
|
4 |
15 (0x0F) |
2.425 |
|
5 |
16 (0x10) |
2.430 |
|
6 |
17 (0x11) |
2.435 |
|
7 |
18 (0x12) |
2.440 |
|
8 |
19 (0x13) |
2.445 |
|
9 |
20 (0x14) |
2.450 |
|
10 |
21 (0x15) |
2.455 |
|
11 |
22 (0x16) |
2.460 |
|
12 |
23 (0x17) |
2.465 |
|
13 |
24 (0x18) |
2.470 |
|
14 |
25 (0x19) |
2.475 |
|
15 |
26 (0x1A) |
2.480 |
Note Avoid channel 26 if possible, as the output power is capped at +8 dBm on the Pro variant.
Default
0xFFFF
PDF
