RP (RSSI PWM Timer)

This command applies to the XBee 3 802.15.4 RF Module.

The PWM timer expiration in 0.1 seconds. RP sets the duration of pulse width modulation (PWM) signal output on the RSSI pin. The pin signal duty cycle updates with each received packet and shuts off when the timer expires. This command is only applicable when P0 is set to 1 which enables RSSI PWM output.

When RP = 0xFF, the output is always on.

Parameter range

0 - 0xFF (x 100 ms), 0xFF

Default

0x28 (four seconds)