P1 (DIO11/PWM1 Configuration)
This command applies to the XBee 3 802.15.4 RF Module.
Sets or displays the DIO11/PWM1 configuration (Micro pin 8/SMT pin 8/TH pin 7).
When configured as PWM output (2): you can use M1 to explicitly control the PWM1 output. When used with Analog line passing, PWM corresponds with ADC1.
Parameter range
0, 2 - 5
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 | N/A |
| 2 |
PWM1 output. M1 (PWM1 Duty Cycle) or I/O line passing control the value. |
| 3 | Digital input |
| 4 | Digital output, low |
| 5 | Digital output, high |
Default
0
PDF
