D8 (DIO8/DTR/SLP_Request Configuration)
This command applies to the XBee 3 802.15.4 RF Module.
Sets or displays the DIO8/DTR/SLP_RQ configuration.
Note If D8 is configured as DTR/Sleep_Request (1), the line will be left floating while the device sleeps. Leaving D8 set to 1 and the corresponding pin not connected to anything external to the device may result in higher sleep current draw.
Parameter range
0, 1, 3 - 5
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 |
DTR/Sleep_Request (used with pin sleep and cyclic sleep with pin wake) |
| 2 | N/A |
| 3 | Digital input |
| 4 | Digital output, low |
| 5 | Digital output, high |
Default
1
PDF
