AZ (Extended API Options)
This command applies to the XBee 3 802.15.4 RF Module.
Optionally output additional ZCL messages that would normally be masked by the XBee application.
Use this when debugging FOTA updates by enabling client-side messages to be sent out of the serial port.
The bits in this parameter are used to enable different kinds of normally-suppressed output:
Parameter range
0x00 - 0x0A (bitfield)
Unused bits must be set to 0. These bits may be logically OR'ed together:
|
Bit |
Description |
|---|---|
|
0 |
Reserved |
|
1 |
Output receive frames for FOTA update commands |
|
2 |
Reserved |
|
3 |
Output Extended Modem Status (0x98) frames instead of Modem Status (0x8A) frames when a Secure Session status change occurs |
Default
0
PDF
