Hardware flow control in Bypass mode

Support for hardware flow control in Bypass mode is available with version L0.0.00.00.05.08,A.02.04 of the SARA-R410M cellular component.  Digi recommends that you update to at least firmware version L0.0.00.00.05.08,A.02.04 of the cellular component (using a serial port or from Remote Manager) and firmware version 11414 of the XBee Smart Modem.

Note Earlier versions of the SARA-R410M firmware did not support hardware flow control. The lack of hardware flow control may lead to data loss while in Bypass operating mode during periods of high UART traffic.