Add an XBee 3 Cellular LTE-M/NB-IoT to Remote Manager

Each XBee 3 Cellular LTE-M/NB-IoT must be added to the Remote Manager account inventory list.

Before adding an XBee to your Remote Manager account inventory, you need to determine the International Mobile Equipment Identity (IMEI) number for the device. Use XCTU to view the IMEI number by querying the IM parameter.

Note Digi Remote Manager requires TCP and will not work with NB-IoT, unless the carrier supports TCP.

To add an XBee to your Remote Manager account inventory, follow these steps:

  1. Log into Remote Manager.
  2. Click Devices.
  3. Click Add.
  1. In the Device ID, MAC Address or IMEI field, type or paste the IMEI number of the XBee you want to add.
  2. For Security Code, enter in the security code on the printed label packaged with your device. The same security code is also shown on the label affixed to the bottom of the device.
  1. Click Add Device to add the device. The XBee is added to your inventory.