N# (Preferred Network Technology)
Allows the XBee 3 Cellular LTE-M/NB-IoT module to select the preferred network technology. A reboot or power cycle is required for any parameter changes to become active.
Note For the N# command configuration to take effect, the CP command must be set to 1 (No Profile). Setting the CP command to 1 configures the enabled 4G LTE bands for NB-IoT. If CP is not set to 1, the N# command value is ignored.
Range
0 - 3
| Parameter | Description |
|---|---|
| 0 |
LTE-M with NB-IoT fallback. |
| 1 |
NB-IoT with LTE-M fallback. |
| 2 | LTE-M only. |
| 3 | NB-IoT only. |
Default
0
PDF
