SQ (Reference Signal Received Quality)

This command applies to the XBee Smart Modem.

Returns the Reference Signal Received Quality (RSRQ) value.

The value returned is in hex, and should be converted by the user with the following formula:

RSRQ = -(<hex_value> / 0xA)

Example: The value returned from the command is 82:

RSRQ = -(0x82 / 0xA) = -13.0 dB

Example: The value returned is A0:

RSRQ = -(0xA0 / 0xA) = -16.0 dB

If the value cannot be retrieved for some reason, such as the device is not on the network yet, an empty string with OK after it is returned.

N/A

N/A