%D (Start receive mode)
This command applies to the XBee Smart Modem.
Use this command to start receive mode on the EARFCN channel specified using AT%7.
Parameter range
N/A
Examples
Start receive mode:
AT%D
This command applies to the XBee Smart Modem.
Use this command to start receive mode on the EARFCN channel specified using AT%7.
N/A
Start receive mode:
AT%D
© 2022 Digi International Inc. All rights reserved.
%D (Start receive mode) updated on 04 Jan 2022 03:28 PM