P1 (DIO11/PWM1 Configuration)
This command applies to the XBee Smart Modem.
Sets or displays the DIO11 configuration (pin 7).
Parameter range
0, 1, 3 - 6
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 | Fan enable. Output is low when the XBee Smart Modem is sleeping, turning an attached fan off when the cellular component is in a power saving mode, and also during Airplane Mode |
| 2 | Enables PWM output |
| 3 | Digital input |
| 4 | Digital output, default low |
| 5 | Digital output, default high |
| 6 | I2C SDA |
| 7 | USB direct |
Default
0
PDF
