SM (Sleep Mode)
This command applies to the XBee®-PRO 900HP RF Module.
Sets or displays the sleep mode of the device.
Parameter range
0, 1, 4, 5, 7, 8
| Parameter | Description |
|---|---|
| 0 | Normal. |
| 1 | Pin sleep. In this mode, the sleep/wake state of the module is controlled by the SLEEP_REQUEST line. |
| 4 |
Asynchronous Cyclic Sleep. In this mode, the device periodically sleeps and wakes based on the SP and ST commands. |
| 5 | Asynchronous Cyclic Sleep Pin Wake. When you assert the SLEEP_RQ pin, the device enters a cyclic sleep mode similar to Asynchronous Cyclic Sleep. When you de-assert the SLEEP_RQ pin, the device immediately wakes up. The device does not sleep when you de-assert the SLEEP_RQ pin. |
| 7 | Sleep Support |
| 8 | Synchronized Cyclic Sleep |
Default
0
PDF
