DC (Joining Device Controls)
This command applies to the XBee/XBee-PRO Zigbee RF Module.
Bit field:
Bit settings to enable or disable certain behaviors.
| Bit | Description |
|---|---|
| 0 | Generate a preconfigured link key using the device’s install code (KY will be ignored). |
| 1 | Network Leave Request Not Allowed. Indicates if a router node discards or accepts network leave commands. |
| 2 | Reserved |
| 3 | Reserved |
| 4 |
Verbose Joining Mode. See Extended Modem Status - 0x98 for a full description. |
| 5 |
An orphaned router will not leave the network but will attempt to rejoin the coordinator indefinitely. This functionality also requires the network watchdog to be enabled (NW > 0). See Network watchdog for more information. |
| 7 |
Enable FR after 60 seconds of no beacon responses during join. |
Parameter range
0 - 0xFFFF
Default
0x00
PDF
