CAN Bus page descriptions

The following table describes each of the sections in the CAN Bus page. You can configure up to two CAN bus devices. The options in each section are the same.

For configutation information, see Configure CAN bus baud rate (CAN bus simulator use only).

Note For vehicle use, the baud rate should always be Auto Baud, which is the default.

Item	Description
Enable CAN Bus	Select this option if you are using a CAN bus device.
Baud Rate	Select the correct baud rate. Auto Baud: This is the default. For vehicle use, the baud rate should always be Auto Baud. 250000: Select this option if you are using a CAN bus device.

Item

Description

Enable CAN Bus

Select this option if you are using a CAN bus device.

Baud Rate

Select the correct baud rate.

Auto Baud: This is the default. For vehicle use, the baud rate should always be Auto Baud.
250000: Select this option if you are using a CAN bus device.