P0 (DIO10/PWM0 Configuration)
This command applies to the XBee Cellular Modem.
Sets or displays the PWM/DIO10 configuration (pin 6).
This command enables the option of translating incoming data to a PWM so that the output can be translated back into analog form.
Parameter range
0 - 5
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 | RSSI PWM0 output |
| 2 | PWM0 output |
| 3 | Digital input |
| 4 | Digital output, low |
| 5 | Digital output, high |
Default
0
PDF
