ZDO clusters

The following section outlines common ZDO commands including the following:

Note Not all of these commands are supported by the XBee. Unsupported commands can be handled by a host processor or in MicroPython by enabling unsupported ZDO passthrough—See AO (API Options).

ZDO command	Cluster ID	Supported by the XBee
Network (16-bit) Address Request	0x0000	Yes
Network (16-bit) Address Response	0x8000	Yes
IEEE (64-bit) Address Request	0x0001	Yes
IEEE (64-bit) Address Response	0x8001	Yes
Node Descriptor Request	0x0002	Yes
Node Descriptor Response	0x8002	Yes
Simple Descriptor Request	0x0004	No
Simple Descriptor Response	0x8004	No
Active Endpoints Request	0x0005	Yes
Active Endpoints Response	0x8005	Yes
Match Descriptor Request	0x0006	No
Match Descriptor Response	0x8006	No
End Device Bind Request	0x0020	Yes
End Device Bind Response	0x8020	Yes
Unbind Request	0x0022	Yes
Unbind Response	0x8022	Yes
Management LQI (Neighbor Table) Request	0x0031	Yes
Management LQI (Neighbor Table) Response	0x8031	Yes
Management Rtg (Routing Table) Request	0x0032	Yes
Management Rtg (Routing Table) Response	0x8032	Yes
Management Leave Request	0x0034	Yes
Management Leave Response	0x8034	Yes
Management Permit Join Request	0x0036	Yes
Management Permit Join Response	0x8036	Yes
Management Network Update Request	0x0038	No
Management Network Update Response	0x8038	No