P7 (DIO17/SPI_SSEL Configuration)
This command applies to the XBee 3 Zigbee RF Module.
Sets or displays the DIO17 configuration.
Note The DIO17 configuration is not available with the XBee 3 Zigbee RF Module through-hole module.
Parameter range
0, 1, 4, 5
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 |
SPI_SSEL |
| 4 | Digital output, low |
| 5 | Digital output, high |
Default
1
PDF
