DM (Disable Features)

This command applies to the XBee 3 Zigbee RF Module.

A bit field mask that you can use to enable or disable features. If disabling device functionality for security purposes, we recommend that you also enable secure remote configuration to prevent features from being re-enabled remotely.

Bit field:

Unused bits must be set to 0. These bits may be logically OR'ed together:

A bit field mask that you can use to enable or disable specific features.

If disabling device functionality for security purposes, we recommend that you also enable secure remote configuration to prevent features from being re-enabled remotely.

Bit	Description
0	Reserved
1	Reserved
2	Disable firmware over-the-air (FOTA) updates. When set to 1, the device cannot act as a FOTA client. FOTA File System access is protected with FK (File System Public Key). Note Serial firmware updates are always possible via the bootloader.
3	Disable SRP authentication on the client side of the connection.
4	Disable SRP authentication on the server side of the connection.

Parameter range

0, 4 - 0x1C (bit field)

Default

0