AZ (Extended API Options)

This command applies to the XBee 3 Zigbee RF Module.

Optionally output additional ZCL messages that would normally be masked by the XBee application.

Use this when debugging FOTA updates by enabling client-side messages to be sent out of the serial port.

0x00 - 0x0A (bitfield)

Unused bits must be set to 0. These bits may be logically OR'ed together:

Bit	Description
0	Suppress ZCL output
1	Output receive frames for FOTA update commands
2	Output supported ZCL packets
3	Output Extended Modem Status (0x98) frames instead of Modem Status (0x8A) frames when a Secure Session status change occurs