This command applies to the XBee/XBee-PRO S2C DigiMesh 2.4.
Sets or displays the DIO11/PWM1 configuration (TH pin 7/SMT pin 8).
0 - 5
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 | N/A |
| 2 |
PWM1 output. Value is controlled by M1 parameter or by I/O line passing |
| 3 | Digital input |
| 4 | Digital output, low |
| 5 | Digital output, high |
0