This command applies to the XBee/XBee-PRO S2C DigiMesh 2.4.
Sets or displays the DIO1/AD1 configuration (TH pin 19/SMT pin 32).
0 - 5
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 |
SPI_ATTN for the through-hole device N/A for the surface-mount device |
| 2 | ADC |
| 3 | Digital input |
| 4 | Digital output, low |
| 5 | Digital output, high |
0