This command applies to the XBee/XBee-PRO S2C DigiMesh 2.4.
The character value the device uses to enter Command mode.
The default value (0x2B) is the ASCII code for the plus (+) character. You must enter it three times within the guard time to enter Command mode. To enter Command mode, there is also a required period of silence before and after the command sequence characters of the Command mode sequence (GT + CC + GT). The period of silence prevents inadvertently entering Command mode.
0 - 0xFF
Recommended: 0x20 - 0x7F (ASCII)
0x2B (the ASCII plus character: +)