A2 (Coordinator Association)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the Coordinator association options.
Parameter range
0 - 7 (bit field)
Bit field:
| Bit | Meaning | Setting | Description |
|---|---|---|---|
| 0 | Allow Pan ID reassignment | 0 | Coordinator will not perform Active Scan to locate available PAN ID. It operates on ID (PAN ID). |
| 1 |
Coordinator performs an Active Scan to determine an available ID (PAN ID). If a PAN ID conflict is found, the ID parameter will change. |
||
| 1 | Allow Channel reassignment | 0 |
Coordinator will not perform Energy Scan to determine free channel. It operates on the channel determined by the CH parameter. |
| 1 | Coordinator performs an Energy Scan to find the quietest channel, then operates on that channel. | ||
| 2 |
Allow Association |
0 | Coordinator will not allow any devices to associate to it. |
| 1 | Coordinator allows devices to associate to it. | ||
| 3 - 7 | Reserved |
The binary equivalent of the default value (0x06) is 00000110. ‘Bit 0’ is the last digit of the sequence.
Default
0
PDF
