XBee node offline alarm

This alarm fires when it detects that an XBee node has disconnected from OEM Cloud and does not reconnect within a specific time interval.

From the Alarm Type drop-down in the Add Alarm dialog, select the XBeeNode Offline option for these fields to appear in the dialog.

Field	Description
Fires when XBee nodes to not reconnect within <x> minutes	Enter the maximum length of time an XBee node can remain unconnected. The time is measured in minutes. The default is 5 minutes.
Resets when node reconnects	Specify whether the alarm should automatically reset if the XBee node reconnects. Options are: Selected: The alarm is automatically reset. This is the default. Deselected: The alarm is not automatically reset. You must manually reset the alarm each time it fires. See Reset an alarm.
Scope	Specify the devices or node that should be monitored for this alarm. Options are: Group: Select the Group option and then select a device group. All of the devices in that group are monitored. Only one group can be selected. Device: Select the Device option to display a list of all of the devices registered in OEM Cloud. Click the device that you want to monitor. Only one device can be selected. XBeeNode: Select the XBeeNode option to display a list of the XBee nodes registered in OEM Cloud. Click the node that you want to monitor. Only one node can be selected.

Field

Description

Fires when XBee nodes to not reconnect within <x> minutes

Enter the maximum length of time an XBee node can remain unconnected. The time is measured in minutes. The default is 5 minutes.

Resets when node reconnects

Specify whether the alarm should automatically reset if the XBee node reconnects. Options are:

Selected: The alarm is automatically reset. This is the default.
Deselected: The alarm is not automatically reset. You must manually reset the alarm each time it fires. See Reset an alarm.

Scope

Specify the devices or node that should be monitored for this alarm. Options are:

Group: Select the Group option and then select a device group. All of the devices in that group are monitored. Only one group can be selected.
Device: Select the Device option to display a list of all of the devices registered in OEM Cloud. Click the device that you want to monitor. Only one device can be selected.
XBeeNode: Select the XBeeNode option to display a list of the XBee nodes registered in OEM Cloud. Click the node that you want to monitor. Only one node can be selected.