XBee node excessive deactivations alarm

This alarm fires when it detects an XBee node with an excessive number of deactivations.

From the Alarm Type drop-down in the Add Alarm dialog, select the XBeeNode Excessive Deactivations option for these fields to appear in the dialog.

Field	Description
XBee node goes inactive more than <x> times in <x> minutes	Enter the maximum number of times the node can be inactive during the specified time period. The time is measured in minutes. The default is 60 minutes.
Resets when XBee node activates and stays activated for <x> minutes	Specify whether the alarm should automatically reset if the XBee node activates and remains activated for the specified time period. The time is measured in minutes. The default is 15 minutes. Options are: Selected: The alarm is automatically reset. This is the default. Deselected: The alarm is not automatically reset. You must manually reset the alarm each time it fires. See Reset an alarm.
Scope	Specify the devices or node that should be monitored for this alarm. Options are: Group: Select the Group option and then select a device group. All of the devices in that group are monitored. Only one group can be selected. Device: Select the Device option to display a list of all of the devices registered in OEM Cloud. Click the device that you want to monitor. Only one device can be selected. XBeeNode: Select the XBeeNode option to display a list of the XBee nodes registered in OEM Cloud. Click the node that you want to monitor. Only one node can be selected.

Field

Description

XBee node goes inactive more than <x> times in <x> minutes

Enter the maximum number of times the node can be inactive during the specified time period. The time is measured in minutes. The default is 60 minutes.

Resets when XBee node activates and stays activated for <x> minutes

Specify whether the alarm should automatically reset if the XBee node activates and remains activated for the specified time period. The time is measured in minutes. The default is 15 minutes. Options are:

Selected: The alarm is automatically reset. This is the default.
Deselected: The alarm is not automatically reset. You must manually reset the alarm each time it fires. See Reset an alarm.

Scope

Specify the devices or node that should be monitored for this alarm. Options are:

Group: Select the Group option and then select a device group. All of the devices in that group are monitored. Only one group can be selected.
Device: Select the Device option to display a list of all of the devices registered in OEM Cloud. Click the device that you want to monitor. Only one device can be selected.
XBeeNode: Select the XBeeNode option to display a list of the XBee nodes registered in OEM Cloud. Click the node that you want to monitor. Only one node can be selected.