Subscription usage alarm

This alarm fires when your subscription usage exceeds a specific threshold.

From the Alarm Type drop-down in the Add Alarm dialog, select the Subscription Usage option for these fields to appear in the dialog.

The Fire Condition section contains the conditions that must be met for the alarm to fire.

Field	Description
Service	Select the service you are using.
Metric	Select the metric you want to use to measure subscription usage. Options are SIZE or MESSAGES.
Exceeds	Enter the threshold for the service usage. The value can be measured in KB, MB, or GB.

The Reset Condition section contains the conditions that must be met for the alarm to reset.

Field	Description
Reset Condition	Determines whether the alarm should be automatically reset when the usage value goes below the specified usage threshold. Options are: Selected: The alarm is automatically reset. Deselected: The alarm is not automatically reset. You must manually reset this alarm. See Reset an alarm.

Field

Description

Reset Condition

Determines whether the alarm should be automatically reset when the usage value goes below the specified usage threshold. Options are:

Selected: The alarm is automatically reset.
Deselected: The alarm is not automatically reset. You must manually reset this alarm. See Reset an alarm.

Click Next to specify the scope for the alarm.

Field	Description
Scope	Specify the devices that should be monitored for this alarm. Options are: Group: Select the Group option and then select a device group. All of the devices in that group are monitored. Only one group can be selected. Device: Select the Device option to display a list of all of the devices registered in OEM Cloud. Click on the device that you want to monitor. Only one device can be selected.

Field

Description

Scope

Specify the devices that should be monitored for this alarm. Options are:

Group: Select the Group option and then select a device group. All of the devices in that group are monitored. Only one group can be selected.
Device: Select the Device option to display a list of all of the devices registered in OEM Cloud. Click on the device that you want to monitor. Only one device can be selected.