Open topic with navigation

Add an SM/UDP device task

You can schedule tasks to occur on selected devices that are configured for SM/UDP messaging.

See Create a schedule for details about adding a task to a schedule.

SM/UDP > SM/UDP Request Connect command

This command sends an SM/UDP Request Connect message to the selected devices.

Option Description
Response Required

Determines whether OEM Cloud waits for a response from the device.

  • Selected: The operation is not complete unless OEM Cloud receives a response from the device. If a response is not received, the operation has failed.
  • Not selected: The operation is complete when OEM Cloud successfully sends a message.

SM/UDP > SM/UDP Reboot command

This command sends an SM/UDP reboot command to the selected devices.

Option Description
Response Required

Determines whether OEM Cloud waits for a response from the device.

  • Selected: The operation is not complete unless OEM Cloud receives a response from the device. If a response is not received, the operation has failed.
  • Not selected: The operation is complete when OEM Cloud successfully sends a message.

SM/UDP > SM/UDP Ping command

This command sends an SM/UDP ping request to the selected devices.

SM/UDP > SM/UDP Command Line command

This command runs an SM/UDP command on the selected devices.

Option Description
Command Enter the CLI command that you want to run.
Max response length (number of messages) Determines the number of response messages from the device that can be received.
Response Required

Determines whether OEM Cloud waits for a response from the device.

  • Selected: The operation is not complete unless OEM Cloud receives a response from the device. If a response is not received, the operation has failed.
  • Not selected: The operation is complete when OEM Cloud successfully sends a message.

 

© 2018 OEM Technology Solutions. All rights reserved.
Add an SM/UDP device task updated on 15 Aug 2018 12:00 PM