Peer to peer networks

This following section provides the RF communication type and RF mode for XTC RF Module peer-to-peer networks.

Definition

In Peer-to-peer networks, devices remain synchronized without the use of master/slave dependencies. Each device shares the roles of master and slave. Digi's peer-to-peer architecture features fast synch times (35 ms to synchronize devices) and fast cold start times (50 ms before transmission).

Sample network profile (Broadcast communications)

Note Assume default values for all parameters that are not in this list. These profiles do not reflect addressing implementations.

Use default values for all devices.

Sample network profile (Acknowledged communications)

Note Assume default values for all parameters that are not in this list. These profiles do not reflect addressing implementations.

All devices:

  1. Send MY 0 to set the source address to 0x00.
  2. Send DT FFFF to set the destination address to 0xFFFF.
  3. Send RR 3 to set the number of retries to 3.

Basic RF modes

Streaming.

Acknowledged RF mode

Acknowledged.