PL (TX Power Level)
This command applies to the XTC RF Module.
Sets or displays the power level at which the device transmits conducted power.
The PRO XTC device requires the power supply to be above 3.3 V to ensure 30 dBm output power. The following table shows the typical values over supply voltage.
| Power supply | Output power |
|---|---|
| 3.3 to 3.6 V | 30 dBm typical |
| 3.0 V | 29 dBm typical |
| 2.6 V | 27 dBm typical |
Binary command
0x3A (58 decimal)
Parameter range
0 - 4
| XB9XT (non-PRO) | XBP9XT (PRO) | |
|---|---|---|
| Parameter | Configuration | Configuration |
|
PL0 |
0 dBm | 21.5 dBm |
|
PL1 |
10 dBm | |
|
PL2 |
13 dBm | |
|
PL3 |
13 dBm | 27 dBm |
|
PL4 |
13 dBm | 30 dBm (1 Watt) |
Default
4
Bytes returned
1
PDF
