Configure the buffer time for continuous monitoring

To ensure the desired amount of data is stored when an alarm occurs, you should configure the buffer time range for the sensor.

1. Sign in to Remote Manager.
2. Click your user name and select Open Classic Remote Manager.
3. Click Device Management > Devices.
4. Double-click on the Connect Tank device you want to configure.
5. Expand the Configuration menu.
6. Click Device Settings.
7. Configure the buffer time range for before and after the alarm event. The time is measured in seconds.
   1. In the Buffer Sensor Data Before Alarm field, select the number of seconds of sample data that occurred before the alarm that should be saved and pushed.
   2. In the Buffer Sensor Data After Alarm field, select the number of seconds of sample data that occurred after the alarm that should be saved and pushed.
8. Apply the configuration changes:
1. Click Save > Schedule. The Save Device Properties dialog appears.
2. Select Immediate.
3. Select Schedule Offline.
4. Click Schedule. Connect Tank downloads and applies configuration changes the next time it connects to Remote Manager.