Internal Temperature option definitions
The following table provides Remote Manager internal temperature monitoring options for Connect Tank. For additional information about using these options, see Configure internal temperature settings.
CAUTION! If Connect Tank sends reports less than 15 minutes apart, it may result in an internal temperature that is above the ambient temperature.
| Option | Description |
Range |
Default |
|---|---|---|---|
| Interface Enable | Enables or disables the internal temperature sensor. | On/Off | Off |
| High Alarm | Enables or disables high alarm reports for the internal temperature value. | On/Off | Off |
| High Threshold | Specifies the internal temperature in degrees Celsius that generates a high alarm report when High Alarm is On. | -100 to 100 | 50.0 |
| Low Alarm | Enables or disables low alarm reports for the internal temperature value. | On/Off | Off |
| Low Threshold | Specifies the internal temperature in degrees Celsius that generates a low alarm report when Low Alarm is On. | -100 to 100 | 0 |
| Hysteresis |
Specifies the degrees in Celsius to keep an alarm on or shut off an alarm during high and low alarm states. 0 — Hysteresis is off 1 or more — Hysteresis is on and managing alarms |
0 to 100 | 5.0 |
PDF
