Digital Input option definitions

The following table provides Remote Manager definitions for Connect Tank Digital: Input options. For details about setting these options, see Enable and configure a digital input.

Option	Description	Range	Default
Interface Enable	Enables or disables the digital input source.	On/Off	Off
High Alarm	Enables or disables high alarm reports for the digital input source. When enabled, sends an alarm report when the pin is high.	On/Off	Off
Low Alarm	Enables or disables low alarm reports for the digital input source. When enabled, sends an alarm report when the pin is low.	On/Off	Off
Delta Low Alarm	Enables or disables delta low alarm reports for the digital input source. When enabled, sends an alarm report for a falling transition.	On/Off	Off
Delta High Alarm	Enables or disables delta high alarm reports for the digital input source. When enabled, sends an alarm report for a rising transition.	On/Off	Off
Rising Edge Wake	Enables or disables the device to monitor a digital input during sleep mode. When enabled, wakes the device when the digital input changes from low voltage to high voltage (rising edge) and reports the value to Remote Manager with the other sensor and device data.	On/Off	Off
Falling Edge Wake	Enables or disables the device to monitor a digital input during sleep mode. When enabled, wakes the device when the digital input changes from high voltage to low voltage (falling edge) and reports the value to Remote Manager with the other sensor and device data.	On/Off	Off
Enable pullup	Enables or disables the internal pull-up resistor to drive a logic level voltage. For example, use this to drive a logic voltage across a mechanical switch to read the value (open or closed) of the mechanical switch.	On/Off	Off
Sensor description	Specifies description of the sensor for this input source.	Text	Empty