File Management page in the XBee Gateway web interface

You can use the File Management page to load files onto XBee Gateway and display current information about loaded files. For a description of the XBee Gateway file system layout, see XBee Gateway file system.

Access the File Management page

Follow this process to access the File Management page in the web interface:

1. Access and log into the web interface.
2. Click File Management under Administration to launch the File Management page.

File Management page

The following fields and buttons appear on the File Management page:

Volume Information section: Displays the current directory for loading files and free space remaining.

Note Digi recommends using no more than 20 MB for custom applications, as XBee Gateway requires a portion of the same space to be capable of managing persistent system logs and firmware updates.

Upload to Current Directory section: Uploads files to the current directory.

• Choose File: To find a file on your computer, click Choose File and go to the file.
• Update file: Click Update file to begin the file upload process.

File List: A listing of the current directory (as noted in the Volume Information section) on the device.

• Open: Opens a directory after it is selected in the file list. The current directory changes and the list is updated.
• Make Directory: Creates a new, empty directory in the current directory.

• Save As: Downloads a regular file from the file system to your local computer.

• Remove: Deletes files or empty directories. If there are one or more files in a directory, the directory cannot be deleted.

Refresh button: Reloads the information on the page.