Linux command: wancm

On cellular-enabled XBee Gateway and XBee Industrial Gateway devices, the wancm command is available.

This command can be used to see the status of the cellular connection, and to perform certain management activities.

Usage

Usage: wancm command [profile]

command:
   connect         Connect or reconnect to network
   disconnect      Disconnect from network
   fw_update       Device firmware update
   exit            Disconnect and exit
   info            Print information
   power (on|off)  Power device on or off
   power suspend   Wake on SMS received
   prl_update      CDMA PRL update
   providers       Get supported providers
   provision       CDMA provision
   rci             Get RCI information
   reset           Reset device and reconnect
   scan            GSM operator scan
   sms_stats       Print SMS statistics
   sms_recvlog     Print SMS received message log
   sms_sentlog     Print SMS sent message log
   sms_clearlog    Clear SMS received and sent message logs

profile:           Profile index (0-3)
                   "first" for highest priority
                   "next" for next lower priority
                   Default is current profile

Telit OTA firmware update:   fw_update_ota [profile] param=value...
   file            File name on FTP server (required)
   server          FTP server name or IP address
   port            FTP server port number
   user            FTP server user name
   password        FTP server password
   directory       FTP server directory

 

Example:

 

$ wancm info

            Device Type: LTE
           Manufacturer: Telit
                  Model: LE910-NA1
               Revision: 20.00.526.0
          Serial number: 353535095837892
           Phone number: 15888675309
               SIM IMSI: 313460000000001
              SIM ICCID: 89100123450004598765
         SIM PIN status: READY
        Signal strength: -79 dBm
           Signal level: 3 of 3 bars
         Signal quality: -3.5 dB    
    Registration status: Registered (Home Network)
                Cell ID: 4E7B57E
     Location area code: 4611
    Mobile country code: 310
    Mobile network code: 410
          Operator name: AT&T
                Service: LTE
                   Band: 2
                Channel: 1000
                Profile: 0
       Connection state: Connected
    Connection duration: 8 days 12:16:12
             IP address: 192.0.2.156
    DNS primary address: 192.0.2.62
  DNS secondary address: 192.0.2.64
      Receive idle time: 15
     Transmit idle time: 15
            Connections: 1
      Connection errors: 0
           Carrier loss: 0
        LCP echo failed: 0
           Idle timeout: 0
        User disconnect: 0
      Monitoring errors: 0
          Device resets: 0
         Received bytes: 1327535
      Transmitted bytes: 6057077
   Total received bytes: 1327535
Total transmitted bytes: 6057077