show smscell

Purpose

Displays current settings for the Short Message Service (SMS) capabilities of the mobile module of the Digi device.

Required permissions

For Digi products with two or more users, for this command to display settings, permissions for the set smscell command must be set to set permissions s-sms-cellular=read or set permissions s‑sms‑cellular=rw. See set permissions for details on setting user permissions for commands.

Syntax

show smscell [group]

Options

group

One or more SMS settings groups, configured by several versions of the set smscell command. If no group is specified, all is the default.

global

Show global SMS settings that configure operation of SMS for the Digi device.

scl

Show Sender Control List SMS settings. The Sender Control List (SCL) permits users to select the addresses (or phone numbers) from which SMS messages will be accepted.

python

Show settings for processing Python commands sent via SMS.

command

Show settings controlling execution of built-in SMS commands. Several built-in commands are supported for execution via SMS messages sent to your Digi device.

all

Show all SMS settings.

The default is all.

Examples

#> show smscell

Global options:

  state           : off
  ackrcvdcmds     : off
  nakpswdfail     : off
  exteventlog     : off
  password        : (none)
  defreceiver     : logonly
  cmdidchar       : #

SCL options:

  state           : off
  nakrejectedcmds : off
  SCL entry 1:
    enabled       : off
    match         : right
    address       :
  SCL entry 2:
    enabled       : off
    match         : right
    address       :
  SCL entry 3:
    enabled       : off
    match         : right
    address       :
  SCL entry 4:
    enabled       : off
    match         : right
    address       :
  SCL entry 5:
    enabled       : off
    match         : right
    address       :
  SCL entry 6:
    enabled       : off
    match         : right
    address       :
  SCL entry 7:
    enabled       : off
    match         : right
    address       :
  SCL entry 8:
    enabled       : off
    match         : right
    address       :
  SCL entry 9:
    enabled       : off
    match         : right
    address       :
  SCL entry 10:
    enabled       : off
    match         : right
    address       :
  SCL entry 11:
    enabled       : off
    match         : right
    address       :
  SCL entry 12:
    enabled       : off
    match         : right
    address       :
  SCL entry 13:
    enabled       : off
    match         : right
    address       :
  SCL entry 14:
    enabled       : off
    match         : right
    address       :
  SCL entry 15:
    enabled       : off
    match         : right
    address       :
  SCL entry 16:
    enabled       : off
    match         : right
    address       :

Python options:

  state           : on
  password        : (none)
  readqueuemsgmax : 100
  readholdsecmax  : 600

Command options:

  Command "help":
    state         : on
    password      : (none)
  Command "cli":
    state         : on
    password      : (none)
  Command "dcloud": 
    state         : on
    password      : (none)
  Command "ping":
    state         : on
    password      : (none)