findme

Purpose

Note This command is supported in Digi Connect ES only.

This command turns on/off the Locator LED to aid in finding a specific device among a group of devices. See the Digi Connect ES Device Server Hardware Setup Guide on Digi.com for the location of the Locator LED.

Required permissions

For Digi products with two or more users, set permissions to set permissions display=execute to use this command. See set permissions for details on setting user permissions for commands.

Syntax

findme [blink={on|off}]

Options

blink={on|off}

Causes the Locator LED to blink or stop blinking.

on

Causes the Locator LED to blink.

off

Causes the Locator LED to stop blinking.

Example

Display the current state of the Locator LED

#> findme

Cause the Locator LED to blink

#> findme blink=on